Mk5 Manual Mandrel Tube Pipe Bender

< id="block-system-main" class="block block-system">

MK5 Manual Mandrel Tube Pipe Bender


MK5 Manual Mandrel Tube Pipe Bender



MK5 Manual Mandrel Tube Pipe Bender



MK5 Manual Mandrel Tube Pipe Bender

MK5 Manual Mandrel Tube Pipe Bender
MK5 Manual Mandrel Tube Pipe Bender

MK5 Manual Mandrel Tube Pipe Bender

MK5 Manual Mandrel Tube Pipe Bender

MK5 Manual Mandrel Tube Pipe Bender



MK5 Manual Mandrel Tube Pipe Bender

   MK5 Manual Mandrel Tube Pipe Bender

Mandrel Tube Bender for mild steel, stainless steel and aluminium. Maximum capacities are 1 1/2" (38.1mm) (14swg) in aluminium and copper and 1 1/4" diameter 16swg (1.5mm) in mild steel and 1 1/8 (16 swg) stainless steel tubing. Which allows bends down to 1.25D (1.25 times the tube diameter as a bend radius) This makes it perfect for racing car water and oil pipes where the routed pipes can hug the chassis or engine. It can also be used in any situation where a bend is required tighter than the 3D bends possible with a rotary draw bender.

Because of the sheer physical effort involved in bending 1.25 x 16 swg steel this machine has a five to one reduction ratio between the operating spindle and the main mandrel spindle which means it can bend 1.25 x 16swg steel tubing on a 2.0 centre line radius. In all cases, a thinner wall tube can be bent very satisfactorily and various internal'bullet'-type mandrels in steel or nylon can be supplied to suit your particular tube wall thickness. Due to the unique design, the benders will allow amazingly tight bends to be formed with the minimum of tube distortion (a nominal 3-4% of the diameter). The MK5 Mandrel Tube Bender comes with an easy-to-read degree dial to allow precise angles of bend to be achieved and repeated. The machines are extremely easy to use and allow for multiple bends in the same piece of tube at alternate angles on different planes.

Once the machines are set for a particular size of tube it will be found that multiple bends are rapidly achieved. Check out the sample pictures above of the 5/8" and 3/4" od tubing bent on a 1.5" CLR, and the 1.0" steel and stainless steel tube bent on a 2.0 CLR. Price includes the machine only. All die sets are extra (die set comprises of the main die, backing block and internal bullet mandrel).

The tube bender is 30kg in weight and easily mounted in any decent vice or can be bolted permanently to a suitable bench or stand. 1 1/4 x 16swg (1.5mm). 1 1/8 x 16swg (1.5mm). 1 1/2 x 14swg (1.9mm). 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1 1/4", 1 3/8" & 1 1/2.
Die Sets and Prices are below. Custom Die Sets in any size made to order.
Nylon internal mandrel bullets are recommended for aluminium as very little if any further lubrication is required. 10mm pipe diameter x 19mm CLR. 10mm pipe diameter x 25mm CLR.

12mm pipe diameter x 25mm CLR. 12mm pipe diameter x 30mm CLR. 12mm pipe diameter x 40mm CLR. 14mm pipe diameter x 25mm CLR. 14mm pipe diameter x 30mm CLR. 14mm pipe diameter x 40mm CLR. 16mm pipe diameter x 25mm CLR.

16mm pipe diameter x 30mm CLR. 16mm pipe diameter x 40mm CLR.
18mm pipe diameter x 25mm CLR. 18mm pipe diameter x 30mm CLR.
18mm pipe diameter x 40mm CLR. 19mm pipe diameter x 25mm CLR. 19mm pipe diameter x 30mm CLR. 19mm pipe diameter x 40mm CLR. 22mm pipe diameter x 30mm CLR.

22mm pipe diameter x 40mm CLR. 22mm pipe diameter x 50mm CLR. 25mm pipe diameter x 40mm CLR. 25mm pipe diameter x 50mm CLR.
30mm pipe diameter x 60mm CLR. 35mm pipe diameter x 60mm CLR. 3/8" pipe diameter x 1.0" CLR. 1/2" pipe diameter x 1.0" CLR. 1/2" pipe diameter x 1.25" CLR. 1/2" pipe diameter x 1.50" CLR. 5/8" pipe diameter x 1.0" CLR. 5/8" pipe diameter x 1.25" CLR. 5/8" pipe diameter x 1.50" CLR. 3/4" pipe diameter x 1.0" CLR. 3/4" pipe diameter x 1.25" CLR.


3/4" pipe diameter x 1.50" CLR. 3/4" pipe diameter x 2.0" CLR. 7/8" pipe diameter x 1.50" CLR. 7/8" pipe diameter x 2.0" CLR.

1.0" pipe diameter x 1.50" CLR. 1.0" pipe diameter x 2.0" CLR. 1.125" pipe diameter x 2.5" CLR. 1.25" pipe diameter x 2.5" CLR. 1.375" pipe diameter x 2.5" CLR.
1.5" pipe diameter x 2.5" CLR. 1.5" pipe diameter x 3.0" CLR. The item "MK5 Manual Mandrel Tube Pipe Bender" is in sale since Thursday, March 12, 2015. This item is in the category "Business, Office & Industrial\Metalworking/Milling/Welding\Other Metalworking Tools". The seller is "stakesys" and is located in Loughborough.
This item can be shipped worldwide.
  • Brand: Useful Tools
  • MPN: UTMK5


MK5 Manual Mandrel Tube Pipe Bender

   MK5 Manual Mandrel Tube Pipe Bender